Home / Component Range / ModX - Fixed Frame Solar Systems / ModX2 - Fixed Frame Engineered Solar System / Valen ModX2 Off-Grid Solar 15.36kWh 48VDC, Wind Region A & B
SKU: ModX2 - 15.36kWh - 48VDC
Valen ModX2 builds on Valen’s long-standing expertise in delivering dependable remote power solutions for critical infrastructure. The 15.36kWh model is the higher-capacity option in the ModX2 range, built for sites with heavier loads, longer autonomy needs or tougher winter solar conditions.
The ModX2 15.36kWh is a fully integrated, pre-engineered solar energy storage solution manufactured by Valen Power. It combines solar generation, lithium battery storage, power conversion and intelligent energy management in a single weatherproof outdoor enclosure, rated for Wind Regions A and B.
With 50% more usable storage than the 10.24kWh model, it keeps critical equipment running through extended low-sun periods and reduces the risk of downtime at sites that are costly or slow to reach. Every component is selected to work together, including WeCo LiFePO₄ battery technology, Valen stainless steel industrial enclosures, high-efficiency solar panels, and Victron monitoring and control systems. Optional configurations are available to suit specific project requirements.

The ModX2 15.36kWh is purpose-built for remote, autonomous and mission-critical sites where a higher energy reserve is essential. It suits telecommunications infrastructure, SCADA and telemetry, CCTV and security, traffic and transport systems, environmental monitoring and off-grid industrial sites. The added storage is especially valuable for higher continuous loads, sites needing extended days of autonomy, and southern or high-altitude locations with reduced winter sun. As a fully certified, integrated solution, ModX2 removes the complexity of traditional solar installations and delivers dependable long-term power where failure is not an option.
| SKU | ModX2 - 15.36kWh - 48VDC |
|---|---|
| Length | 117 mm |
| Width | 100 mm |
| Height | 240 mm |
A pre-engineered off-grid solar power system is a solar array, battery storage, power conversion and control platform that is integrated, wired, tested and structurally certified as a single unit in a factory, then delivered to…
Full answer: What is a pre-engineered off-grid solar power system?
Supplied as an integrated, factory-tested unit: the solar array on its certified fixed frame, the LiFePO₄ battery modules, solar charge control, inverter and DC-DC conversion, the monitoring controller, and the stainless steel enclosure with 4RU…
Full answer: What is included in a ModX2, and what do I still need to supply?
ModX2 is sized for continuous loads in the 80 W to 1,000 W range, the band that covers almost all remote monitoring, control and communications infrastructure. It provides up to 1,000 W continuous AC with…
Full answer: What loads can a ModX2 run?
ModX2 is supplied with monitoring through the Victron VRM portal, factory configured before dispatch. You get remote visibility of solar generation, battery state of charge, load, alarms and system events, over Modbus TCP/IP, Ethernet and…
Full answer: How do I monitor a remote off-grid power system?
ModX2 is held in stock. Standard configurations dispatch within one week of order placement. Where a system needs customisation, allow up to four weeks. Every unit is factory tested and fully documented before it enters…
Full answer: What is the lead time on a ModX2?
An account is required to add products to your cart, please login or register for an account.