ModX2 - Fixed Frame Engineered Solar System
Pre-engineered solar and lithium battery power for remote sites, built and tested in Australia
ModX2 is Valen Power’s fully integrated off-grid solar system for small-scale remote power. Solar generation, LiFePO4 battery storage, charge control and remote monitoring are built into one weatherproof stainless steel enclosure on a fixed tilt frame. It gives you dependable power wherever the grid can’t reach.
Every ModX2 assembly is pre-wired, tested and certified at our facility in Lawson, NSW before it leaves. That means less work on site, up to 70% less installation time, and one warranty and one support contact for the whole system. Standard configurations are held in stock and dispatch within one week of order.
Where ModX2 is used
Communications (LoRaWAN, microwave, Wi-Fi and LTE), obstruction lighting, rail and traffic monitoring, environmental monitoring, security cameras and gate access, and remote control systems for oil, gas, pipeline, water and wastewater assets.
Browse the ModX2 assemblies below, or use the ModX2 sizing calculator to find the right battery capacity for your load and site.
ModX2 is Valen Power’s fully integrated off-grid solar system for small-scale remote power. Solar generation, LiFePO4 battery storage, charge control and remote monitoring are built into one weatherproof stainless steel enclosure on a fixed tilt frame. It gives you dependable power wherever the grid can’t reach.
Every ModX2 assembly is pre-wired, tested and certified at our facility in Lawson, NSW before it leaves. That means less work on site, up to 70% less installation time, and one warranty and one support contact for the whole system. Standard configurations are held in stock and dispatch within one week of order.
Where ModX2 is used
Communications (LoRaWAN, microwave, Wi-Fi and LTE), obstruction lighting, rail and traffic monitoring, environmental monitoring, security cameras and gate access, and remote control systems for oil, gas, pipeline, water and wastewater assets.
Browse the ModX2 assemblies below, or use the ModX2 sizing calculator to find the right battery capacity for your load and site.
ModX2 - Fixed Frame Engineered Solar System Range
Filter by:
Low Stock
Specifications
| SKU | ModX2 - 10.24kWh - 48VDC |
|---|---|
Download Specification Sheet
Download Information Sheet
Low Stock
Specifications
| SKU | ModX2 - 15.36kWh - 48VDC |
|---|---|
Download Specification Sheet
Download Information Sheet
Low Stock
Specifications
| SKU | Modx2 |
|---|---|
| Length | 811 mm |
| Width | 850 mm |
| Height | 2183 mm |
Download Information Sheet
Ideal applications include
- LiFePO4 battery storage in 5.12kWh, 10.24kWh and 15.36kWh capacities, rated for 6,000 cycles at 80% depth of discharge
- 990Wp solar array on a 25° fixed tilt frame with a Victron MPPT charge controller
- Stainless steel, fan-cooled enclosure with three-point padlockable locking and 4RU+ of equipment space
- Structurally certified to AS 1170.2 Wind Region C, with engineering documentation included
- Remote monitoring through the Victron VRM portal, so most issues can be diagnosed without a site visit
- Portable design that can be redeployed to your next project