We power what can't fail

Energy Storage Solutions

34RU Stainless Steel Outdoor Enclosure with 1500W DC Air-Con

SKU: BE75072

34RU stainless steel outdoor enclosure with a built-in 1500W DC air conditioner. IP55, 19 inch rack mount, supplied assembled for comms, rail and ITS.

Valen’s 34RU Stainless Steel Outdoor Enclosure, also supplied as an outdoor telecom cabinet, is a welded, IP55-rated 304 stainless steel housing built for outdoor sites where active cooling matters as much as weatherproofing: communications exchanges, mining sites, rail trackside locations and roadside traffic management infrastructure. A front-door-mounted DC48V/1500W air conditioner keeps internal temperatures stable for heat-sensitive electronics, backed by a welded, gasket-sealed, single-skin frame with 10mm heat insulation and a rain hood for extra weather protection. 

Supplied fully assembled with 19-inch adjustable rack rails, battery support brackets, a fixed shelf and a 3U circuit breaker holder already fitted, it arrives ready to install.

Price

+GST

Qty

34RU Stainless Steel Outdoor Enclosure with 1500W DC Air-Con

Features

  • Active thermal management: front-door-mounted DC48V/1500W air conditioner (R513A refrigerant) keeps internal equipment at a stable operating temperature in high ambient heat
  • IP55 weatherproof rating: welded single-skin frame with gasket seals on the cabinet edge, plus a rain hood for added weather protection
  • Heavy duty 304 stainless steel construction: 2.0mm stainless steel frame, doors, roof and panels, with galvanised steel internal rack rails and support brackets for structural strength
  • Insulated for thermal efficiency: 10mm heat insulation lining supports the air conditioner’s performance and shields equipment from external heat load
  • Dual 3-point locking: pad-lockable 3-point locking on both front and rear doors for secure, tamper-resistant access at unmanned sites
  • 19-inch rack mount: four adjustable 34RU rack mounting rails for standard telecom and data equipment
  • Supplied fully assembled: arrives with a bottom plinth, three sets of angled battery support brackets, a heavy duty fixed shelf and a 3U circuit breaker holder already fitted, ready to install
  • Cable entry and earthing: four 50mm cable entry points with rubber grommets, plus a ground busbar for earthing compliance
  • Optional accessory kit: DC48V LED interior light and door alarm sensor available for remote monitoring of unauthorised access
  • Colour: RAL7035 grey powder-coat finish

Applications

Data centres, Rail, Communications, Telemetry, Mining, UPS, Solar, High Temperature Applications, Remote Power, Off-Grid Solar System

Specifications

SKUBE75072
Length800 mm
Width750 mm

Downloads

Download Specification Sheet

Download Information Sheet

Related Products

Frequently Asked Questions

What ventilation does a battery room or enclosure need?

VRLA vents hydrogen under over-charge and high temperature; hydrogen is flammable above roughly 4% in air. Requirements sit in AS 2676 and AS 3011. A sealed IP-rated cabinet containing a battery bank with no designed…

Full answer: What ventilation does a battery room or enclosure need?

What does the cabinet thermal design need to achieve?

More than most people specify, and it usually matters more than the battery choice. Queensland TMR (MRTS213) requires: an IP-rated, double-skinned enclosure with ventilation slots thermostatically controlled fans and a heater white (N14) heat-reflective paint…

Full answer: What does the cabinet thermal design need to achieve?

How do I keep battery banks alive in extreme heat?

Fix the enclosure before the battery. VRLA loses roughly 50% of its life for every 10 °C sustained above 20 °C, and heat damage cannot be reversed. In order of effect: Measure the temperature inside…

Full answer: How do I keep battery banks alive in extreme heat?

How does temperature affect front terminal battery life in Australian conditions?

Temperature is the dominant variable in Australian industrial battery life, and it is under-modelled almost everywhere. The relationship. EUROBAT states that float operation above 20 °C reduces VRLA life expectancy by approximately 50% for every…

Full answer: How does temperature affect front terminal battery life in Australian conditions?

Will a front terminal battery fit my existing rack?

Check the dimensions, not the amp-hours. There is no standard defining front terminal battery case dimensions. It is a de facto industry convention shaped by rack depth and shelf pitch, not a standardised footprint, which…

Full answer: Will a front terminal battery fit my existing rack?

More Australian standards and compliance FAQs

Enquire Now

Login Required

An account is required to add products to your cart, please login or register for an account.