We power what can't fail

Energy Storage Solutions

19RU Galvanised Steel Outdoor Enclosure, Naturally Vented

SKU: BE75061

19RU galvanised steel outdoor enclosure, naturally vented and IP55 rated, with a solar panel bracket included. Built for comms, rail and ITS sites.

Valen’s 19RU Galvanised Steel Outdoor Enclosure is a welded, IP55-rated galvanised steel housing built for outdoor sites across communications, mining, rail and intelligent transport networks. Unlike Valen’s fan-assisted and air-conditioned outdoor models, this enclosure uses passive, filtered venting only, with no fans, making it a lower-cost, lower-maintenance option for sites where equipment doesn’t generate a significant heat load. Front and rear doors, each with 3-point locking, give maintenance access from either side, and a solar panel mounting bracket is included as standard, making this a ready-made housing for a stand-alone solar power site.

Price

+GST

Qty

19RU Galvanised Steel Outdoor Enclosure, Naturally Vented

Features

  • Passive ventilation: filtered, rain-covered vents on each side wall manage airflow without fans, suited to lower heat-load equipment
  • IP55 weatherproof rating: welded single-skin construction with filtered vent covers that maintain dust and weather protection
  • Heavy duty galvanised steel construction: 2.0mm galvanised steel body, doors, roof and rails, with a heavier 3.0mm plinth for ground-level durability
  • Front and rear door access: 3-point locking on both doors, for maintenance access from either side of the cabinet
  • 19-inch rack mount: four adjustable rails with cable management rings, providing 19RU of rack mount space
  • Solar-ready: includes a solar panel mounting bracket as standard, suited to stand-alone off-grid solar sites
  • Arrives ready to fit: includes a 150mm bottom plinth, a heavy duty shelf, a 3U circuit breaker holder and an equipment mounting panel
  • Earthing: ground busbar included for earthing compliance
  • Colour: RAL7035 grey powder-coat finish

Related:

  • Need fan-assisted or active refrigerated cooling for a higher heat load? See the 30RU Stainless Steel Outdoor Enclosure (fan-ventilated) or the 34RU Stainless Steel Outdoor Enclosure (air conditioned).

Applications

Data centres, Rail, Communications, Telemetry, Mining, UPS, Solar, High Temperature Applications, Remote Power, Off-Grid Solar System

Specifications

SKUBE75061
Box Quantity1

Downloads

Download Information Sheet

Related Products

Frequently Asked Questions

What ventilation does a battery room or enclosure need?

VRLA vents hydrogen under over-charge and high temperature; hydrogen is flammable above roughly 4% in air. Requirements sit in AS 2676 and AS 3011. A sealed IP-rated cabinet containing a battery bank with no designed…

Full answer: What ventilation does a battery room or enclosure need?

What does the cabinet thermal design need to achieve?

More than most people specify, and it usually matters more than the battery choice. Queensland TMR (MRTS213) requires: an IP-rated, double-skinned enclosure with ventilation slots thermostatically controlled fans and a heater white (N14) heat-reflective paint…

Full answer: What does the cabinet thermal design need to achieve?

How do I keep battery banks alive in extreme heat?

Fix the enclosure before the battery. VRLA loses roughly 50% of its life for every 10 °C sustained above 20 °C, and heat damage cannot be reversed. In order of effect: Measure the temperature inside…

Full answer: How do I keep battery banks alive in extreme heat?

How does temperature affect front terminal battery life in Australian conditions?

Temperature is the dominant variable in Australian industrial battery life, and it is under-modelled almost everywhere. The relationship. EUROBAT states that float operation above 20 °C reduces VRLA life expectancy by approximately 50% for every…

Full answer: How does temperature affect front terminal battery life in Australian conditions?

Will a front terminal battery fit my existing rack?

Check the dimensions, not the amp-hours. There is no standard defining front terminal battery case dimensions. It is a de facto industry convention shaped by rack depth and shelf pitch, not a standardised footprint, which…

Full answer: Will a front terminal battery fit my existing rack?

More Australian standards and compliance FAQs

Enquire Now

Login Required

An account is required to add products to your cart, please login or register for an account.