Remote Power In Days, Not Weeks
ModX1 Stand Alone Solar System For Critical Remote Loads
When critical equipment needs reliable power in a remote location, ModX1 takes the hard work out of the design. Pre engineered, pre wired, and pre tested, this compact solar cabinet arrives ready to deploy so your team can focus on the project, not on building a one off system from scratch.
Rapid Deployment
— pre-built and ready to run
Cost Efficient
— saves time and money on build and installation
Guaranteed Compatibility
— all components tested as a complete system
Scalable & Flexible
— adapts to different site demands
Remote Monitoring
— integrated EMS for visibility and control
Remote Power Made Simple
For small-scale remote power, the ModX1 offers a faster, simpler, and more cost-effective path to deployment, with the added advantage of portability for redeployment on future projects.
Build From Scratch Versus ModX1
| Factor | Build from Scratch | ModX1 |
| Design Work | Check MPPT compatibility with batteries and solar panel, confirm communication with Cerbo, design cabinet layout, plan mounting points, source correct door locks, ventilation, and shading for battery life | Fully engineered design with all components proven compatible |
| Purchase Orders | 4–5 separate POs for different components | 1 PO for complete system |
| Lead Time | 2–3 weeks waiting for all components to arrive | 1 week |
| Assembly | 1 week to wire and mount components | Pre-wired and ready to install |
| Labour | Technician or project manager time to assemble and problem-solve | Minimal site labour for installation |
| Mounting Hardware | Sourced and purchased separately | Integrated with system |
| Cost | Up to $30,000 (components + labour) | Under $15,000 |
| Reusability | Often site-specific and fixed | Designed for easy transport and reuse |
| Overall Effort | High – requires coordination of multiple suppliers and deliveries | Low – arrives ready to deploy |
Quick and Easy Installation
Valen’s ModX1 is designed for quick and easy installation, ensuring minimal downtime and reduced labor requirements. With all components weighing under 80kg, transportation and handling are simplified, allowing for effortless site deployment. The unit is securely fastened to the ground using dynabolts, streamlining the installation process. Additionally, the solar panels can be installed at ground level, eliminating the need for elevated work platforms or extensive WHS equipment, further enhancing safety and efficiency on-site.
Prewired Cabinet with Plug-and-Play Solar Panel Connection
Valen ModX1 system comes prewired which deskills the deployment of these cabinets. No longer are qualified technicians required to understand all the components in the system and how they work, Valen has down the heavy lifting. All thats requried is connecting the batteries up and plugging in the solar.
Fully Integrated and Remotely Monitored System
Valen’s ModX1 system utilitise Victron Energy components which all speak to each other and work seemlessly together. no longer is there a need to check compatibility of components, how they’ll install into the cabinet etc. All components communicate with each other and the Cerbo has the ability to connect remotely to Victron Remote Monitoring cloud platform.
Configure your build to request a quote
"*" indicates required fields
| Solar Array | 440w |
|---|---|
| Victron Solar | 50A |
| Enlifen | 408Ah |
| System Voltage | 12v |
| Monitoring Kit | Yes |
| 4G Support | Yes |
Ready To Simplify Your Next Remote Power Project?
Tell us about your site, load, and monitoring requirements. The Valen team will confirm if ModX1 is the right fit, recommend the correct configuration, and send you the full spec sheet and brochure so you can move your design forward with confidence.
ModX1 Specifications
| Key Features | Pre-engineered and pre-wired |
|---|---|
| Solar Capacity | 440Wp |
| Solar Charge Controller | 50A |
| Panel Angle | 30° |
| Panel Mounting | Stainless Steel |
| Enclosure | Powder Coated Stainless Steel |
| Enclosure Locking | Twin door 3pt Padlockable locking |
| Battery Technology | ENLIFEN LiFePO4 |
| Battery Capacity | 2.4 to 9.6kWh |
| Battery Cycles | 6000 (80% DoD) |
| Power Outputs Available | 12V, 24VDC standard. (AC Optional) |
| Dimensions | 700mm (L) x 750mm (W) x 2500mm (H) |
| Designated Available Equipment Space | 10RU+ |
| Monitoring Standard | Cloud, Modbus TCP/IP, VRM Platform |
| Monitoring Options | SNMP. DNP3, Satellite |
| Foundations | Pre-engineered foundations upon request. |
Book a Free Consultation With our Team
Have more questions, or keen to see if ModX1 is right for your application? Instantly confirm a time to discuss your system with our team
Applications
Communications
- LoRaWAN Gateways and End-Nodes
- Radio and Microwave Communications
- Wireless Hot Spots, Wi-Fi, Private LTE, and CBRS
Obstruction Lighting
- Broadcast and Communication Towers
- High Tension Power Lines
- Wind Turbines
Transportation
- Rail Car Tracking
- Traffic Management
- Traffic Monitoring
Environmental
- Air Quality Monitoring
- Cathodic Protection
- Flow Metering
- Seismic Monitoring
- Structural Integrity Monitoring
- Weather Monitoring
Security
- Emergency Alert Boxes
- Gate Access
- Mustering Stations
- Perimeter Monitoring
- Security Cameras
Oil and Gas/Pipeline/ Water/Wastewater
- Block Valve Actuation
- Cathodic Protection
- Flow Metering
- Pipeline Custody Transfer
- PLC and RTU Systems
- Wellhead Controls
Discover
We work to understand your needs, challenges and opportunities.
Design
We work to understand your needs, challenges and opportunities.
Deliver
We strive for excellence in procurement, dispatch and delivery.
Support
We support you for the life of your system.