Victron VE.Direct Cable 1.8m
SKU: SA53056
Linking MPPT controllers, battery monitors and inverters to a GX device, this 1.8m Victron VE.Direct cable carries the data needed for local monitoring and VRM reporting. It has straight connectors at both ends.
The 1.8m length gives enough reach to route cleanly around a typical equipment cabinet. It is a good fit for off-grid solar, remote monitoring and telecommunications installations that use Victron monitoring.
Price
+GST
Qty
Features
Applications
Specifications
| SKU | SA53056 |
|---|---|
| Length | NA mm |
| Width | NA mm |
| Height | NA mm |
Downloads
Download Specification Sheet
Download Information Sheet
Related Products
Frequently Asked Questions
What torque should I use on front terminal battery connections?
Use the figure on the specification sheet for your specific model, and use a torque wrench. There is no universal value, it varies with terminal design, thread size and insert construction. Valen’s front terminal ranges…
Full answer: What torque should I use on front terminal battery connections?
Can I replace just one battery in a string?
Technically yes, practically it is usually a false economy, and there is a real risk in doing it badly. In a series string, every battery carries the same current. A new battery has lower internal…
Full answer: Can I replace just one battery in a string?
What are F1 and F2 terminals?
Both are flat blade terminals on small VRLA batteries. F2 blades are wider than F1. They are not interchangeable without adapters, and getting it wrong is a common ordering error on replacement batteries. Larger stationary…
Full answer: What are F1 and F2 terminals?
Where do I find a battery’s serial number and date code?
Engraved or printed on the top of the case. Record it at installation. It is what a warranty claim is assessed against, and it is the only way to establish true age on a bank…
Full answer: Where do I find a battery’s serial number and date code?
What ventilation does a battery room or enclosure need?
VRLA vents hydrogen under over-charge and high temperature; hydrogen is flammable above roughly 4% in air. Requirements sit in AS 2676 and AS 3011. A sealed IP-rated cabinet containing a battery bank with no designed…
Full answer: What ventilation does a battery room or enclosure need?