Range	Warranty
ENDUROGEL	24 months
ENVIROX-CEL	24 months
ENVIROX-CELPLUS	24 months
TOPIN Front Terminal	24 months
ENLiFEN Front Terminal	36 months

Extended warranty is available on request.

You will notice the gap between warranty and design life, 24 months against a 15-year design life on ENDUROGEL, for example. That gap is normal across the industry rather than unique to Valen, and it exists because the two things measure different risks: warranty covers manufacturing defect, while design life describes expected performance under specified conditions.

Australian specifiers for critical infrastructure routinely require both and treat them separately. A typical specification might ask for a design life over ten years alongside a twelve-month warranty. They are answering different questions.

What actually decides a claim is the conditions, so read those rather than the headline period:

Ambient and cell temperature range the warranty assumes. This is where most claims fail. A long-design-life battery installed in a 45 °C cabinet has not failed prematurely in the manufacturer’s view. It has been operated outside the assumed conditions.
Float voltage and temperature-compensation regime, and whether your charger actually delivers it. A charger without temperature compensation may itself be the reason a claim is declined.
Evidence of a controlled charge regime. This is increasingly explicit in manufacturer warranty terms. Many manufacturers now require proof that the battery was operated within a controlled regime. Monitoring data is warranty evidence.
Depth of discharge limits, and for lithium, throughput or cycle caps and battery management system firmware currency.
Who bears freight and labour on a warranty replacement to a remote site. On a site four hours from a depot this can exceed the value of the battery.
What documentation is required at claim time: commissioning records, discharge test results, monitoring logs, service history.

The most useful thing you can do at installation is start the evidence file: commissioning readings, baseline impedance, and the temperature record. It costs an hour and it is the difference between a complaint and a case.

4. SOLiCORE 48V 100Ah Semi-Solid State LiFePO₄ Rack Mount Battery

Page: https://valen.com.au/shop/lithium-batteries/valen-solicore-solid-state-lithium-batteries/valen-solicore-48v-100ah-solid-state-lifepo4-rack-mount-battery/ Questions: 17 · First six above the spec table URL stays as-is. No redirect required.

4.1 Two page edits required before the FAQ goes live

Edit 1, remove the following text from the product description:

“Solid‑State Safety: No liquid electrolyte, offering higher stability, no fire/smoke risk, and safer operation.”

Replace with:

“Semi-Solid State Safety: a composite polymer electrolyte with substantially reduced free liquid electrolyte, delivering higher thermal stability and improved abuse tolerance compared with a conventional lithium cell. Certified to IEC 62619, UN 38.3 and UL 1973, and tested to UL 9540A.”

Edit 2, replace “solid state” with “semi-solid state” in the visible body copy and headings on this page. The product name, the URL and the page slug stay unchanged; this is a body-copy change only. The FAQ below explains the distinction, which is deliberate. It is a credibility asset, not a concession.

4.2 Specification summary: please publish on the page

Parameter	Specification
SKU	48ELSS100
Nominal voltage	48 V system (51.2 V nominal)
Capacity	100 Ah, approximately 5.1 kWh
Chemistry	LiFePO₄ with composite polymer (semi-solid) electrolyte
Form factor	3U, 19-inch rack mount
Dimensions	517 mm × 442 mm × 133.5 mm
Charge voltage	57.6 V ± 0.8 V (56.8–58.4 V)
Charge current	20 A standard, 50 A fast charge
Discharge current	100 A continuous, 250 A peak for 2 seconds
Discharge cut-off voltage	40 V
Charge temperature range	0 °C to 55 °C
Discharge temperature range	−20 °C to 60 °C
Storage temperature range	−20 °C to 45 °C
Low temperature performance	Over 97% of discharge capacity at −20 °C
Cycle life	5,000+ at 100% DoD · 10,000 at 80% DoD
Parallel configuration	Up to 16 units
Ingress protection	IP54 metal case
Communications	2 × RS485, 1 × CAN, LCD display
Certification	IEC 62619, UN 38.3, UL 1973. Tested to UL 9540A
Warranty	5 years